Hi,

Detailed Case Information:
I have Windows 10 and BitLocker enabled.

HDD, Seagate 3TB, partitioned into 5 drives.

I did this mistake, I created a bootable USB by easy bcd and tested on host window during boot. Reached to the point where windows setup asks for disk selection, I clicked on the drive (setup says drive encrypted and can't continue) but didn't go further.

Then I boot nothing shows up.

Tried to connect 3tb hard to another PC to unlock drive but it's not accepting correct password and recovery key.

I made windows image before encryption. After restoring that 2nd and 4th drives are not accessible, 5th is formatted and 3rd drive data is intact with minor data loss.
My drive is software encrypted.


I ran testdisk-7.0 and found no drive in the quick search. The log file is pasted below.
Fri Jul 1 23:56:11 2016
Command line: TestDisk

TestDisk 7.0, Data Recovery Utility, April 2015
Christophe GRENIER <grenier@cgsecurity.org>

OS: Windows 8 (9200)
Compiler: GCC 4.8, Cygwin 1007.34
Compilation date: 2015-04-18T13:01:55
ext2fs lib: 1.42.8, ntfs lib: 10:0:0, reiserfs lib: 0.3.1-rc8, ewf lib: 20120504, curses lib: ncurses 5.9
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sda)=2199023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(/dev/sdb)=801567145984
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive0)=219 9023255552
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\PhysicalDrive1)=801 567145984
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\C:)=536481890304
filewin32_getfilesize(\\.\D:) GetFileSize err Incorrect function.

filewin32_setfilepointer(\\.\D:) SetFilePointer err Incorrect function.

Warning: can't get size for \\.\D:
filewin32_getfilesize(\\.\E:) GetFileSize err Incorrect function.

filewin32_setfilepointer(\\.\E:) SetFilePointer err Incorrect function.

Warning: can't get size for \\.\E:
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\F:)=1232570679296
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\G:)=801564000256
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\H:)=214748364800
disk_get_size_win32 IOCTL_DISK_GET_LENGTH_INFO(\\.\I:)=214746267648
Hard disk list
Disk /dev/sda - 2199 GB / 2048 GiB - CHS 267349 255 63, sector size=512
Disk /dev/sdb - 801 GB / 746 GiB - CHS 97451 255 63, sector size=512
Drive C: - 536 GB / 499 GiB - CHS 65223 255 63, sector size=512
Drive F: - 1232 GB / 1147 GiB - CHS 149851 255 63, sector size=512
Drive G: - 801 GB / 746 GiB - CHS 97451 255 63, sector size=512
Drive H: - 214 GB / 200 GiB - CHS 26108 255 63, sector size=512
Drive I: - 214 GB / 199 GiB - CHS 26108 255 63, sector size=512

Partition table type default to None
Drive F: - 1232 GB / 1147 GiB
Partition table type: Intel

Analyse Drive F: - 1232 GB / 1147 GiB - CHS 149851 255 63
Current partition structure:

Partition sector doesn't have the endmark 0xAA55

search_part()
Drive F: - 1232 GB / 1147 GiB - CHS 149851 255 63

Results

interface_write()

No partition found or selected for recovery
simulate write!

write_mbr_i386: starting...
Store new MBR code
write_all_log_i386: starting...
No extended partition

TestDisk exited normally.

Note:

How I can repair BitLocker/boot sector on 2nd drive?

Thanking you anticipation.